Bill Williams (IT): Support Site
[home]
|
[profile]
|
[register]
|
[help]
|
[Contact Us]
Revise:
Note: You must be registered in order to post a Topic or Comment.
To register,
click here
.
Note: Only the poster of this message, and the moderator can edit the message.
Your UserName:
Your Passkey:
Forgot your passkey?
[Click Here]
Byline:
for Staff use.
Body Text:
For a guide to
embellishing
the text,
click
here
[h3]SCART Pin Connections [/h3] [b][red]R[/red][green]G[/green][blue]B[/blue][/b] 15. Red Out, 0.7V p-p, 75 Ohms 13. Red ground, 0 Volts 11. Green Out, 0.7V p-p, 75 Ohms 09. Green ground, 0 Volts 07. Blue Out, 0.7V p-p, 75 Ohms 05. Blue ground, 0 Volts 16. RGB Switch 18. RGB Switch ground [b]Composite Video[/b] 19. Composite Video - Out 20. Composite Video - In 17. Composite Video Common, 0 Volts [b]Stereo Audio[/b] 01. RH Audio - Out 03. LH Audio - Out 02. RH Audio - In 06. LH Audio - In 04. Audio Common, 0 Volts [b]Function Select[/b] 08. Function Switch Out / 16:9 Switching 21. 0 Volts (General Ground) the outer case. [b]Not Connected[/b] 10. NC 12. NC 14. NC Pin 8 provides function switching. Applying 9.5-12V to the pin will cause a compatible TV or VCR to switch to the AV (SCART) input. It may also switch on the equipment from standby. Applying 0V or leaving unconnected will switch back to TV. Some TV's also use this pin to select the aspect ratio. Applying 5-8V to pin 8 will switch to 16:9 mode. This may be used by DVD players to set TV to correct ratio. Connect ground to pin 14 or pin 18. ============== Bill.
Check here to include your profile signature.
Check here Remember Details.
Go to Home Page
